StageGuy5145
Member
Hi Controlbooth community!!
I wanted to post a question here to see if anyone had any knowledge about what I am trying to accomplish here. Our setup is 2 ENR 96 dimmers with all incandescent fixtures and current control via a Melange Pro by NSI(We also have the Viewpoint system with 2 entry stations and LCD panel). What I wanted to do was control the lights using a laptop by purchasing a dmx-usb interface. However, upon reading some other posts regarding ENR 96 racks, it seems as if they use CMX. On the other hand, up in our tech booth we have a 5 pin output from the wall that is plugged directly into the Melange. My question is does this mean that the ENR 96 racks are supplying a DMX signal that I could use? And does anyone think it would work if plugged the dmx cable into the interface.
Thanks for all your help, the Melange is a little limited in it's control and I was looking for a little easier/modern control system with more possibilities.
StageGuy5145
I wanted to post a question here to see if anyone had any knowledge about what I am trying to accomplish here. Our setup is 2 ENR 96 dimmers with all incandescent fixtures and current control via a Melange Pro by NSI(We also have the Viewpoint system with 2 entry stations and LCD panel). What I wanted to do was control the lights using a laptop by purchasing a dmx-usb interface. However, upon reading some other posts regarding ENR 96 racks, it seems as if they use CMX. On the other hand, up in our tech booth we have a 5 pin output from the wall that is plugged directly into the Melange. My question is does this mean that the ENR 96 racks are supplying a DMX signal that I could use? And does anyone think it would work if plugged the dmx cable into the interface.
Thanks for all your help, the Melange is a little limited in it's control and I was looking for a little easier/modern control system with more possibilities.
StageGuy5145