The above Ad will no longer appear after you Sign Up for Free!

Sharing an Antenna with both Shure and Telex Mics

Discussion in 'Sound, Music, and Intercom' started by mbenonis, Mar 2, 2004.

  1. mbenonis

    mbenonis Wireless Guy Administrator

    Messages:
    1,432
    Likes Received:
    150
    Occupation:
    Radio Engineer
    Location:
    Washington, DC
    In our auditorium, we have two Telex FMR-150 mics attached to a Telex AD-200 antenna splitter, which connects to two antennas on our catwalk. We also have a number of Shure LX4 receivers, which have antennas attached to them. My question is, is it possible to use the two remaining outputs on the Antenna splitter to connect to the Shure mics to improve their range? Both systems are VHF, I believe.
     
  2. BenFranske

    BenFranske Member

    Messages:
    97
    Likes Received:
    4
    Location:
    Edina, MN
    The LX's are VHF, I don't know about the Telex's. Yes, you should be able to do this, assuming the antennas are properly tuned (ie. both systems are VHF).
     
  3. Nephilim

    Nephilim Active Member

    Messages:
    348
    Likes Received:
    1
    Location:
    Australia
    They would need to be within a certain range of frequencies, depending on the design of the LX channels. But yeah, assuming the Telex frequencies are relatively close to the Shure frequencies, it should be fine.
     

Share This Page