Showbaby 6 with Chauvet freedom pars

zackconn44

Member
Joined
Dec 25, 2018
Location
Deerfield
So I have a city theatrical Showbaby Wireless DMX 6 attached to my etc ion. I was wondering if that could connect to the wireless Chauvet FlareCon that is contained within each freedom par. I know they both run on the same frequency so how would I make them communicate?
 

josh88

Remarkably Tired.
Fight Leukemia
Joined
Jan 26, 2010
Location
Ypsilanti, Michigan
Flarecons need to talk to other flarecons or d-fi's. If you put another showbaby AT the freedom pars you could wire it to one and I believe you can set one to serve as a transmitter to talk to all the other fixtures but as far as I know you can't get the show baby to talk directly to the freedom par wireless, without a wired connection to one of them first.
 

Harrison Hohnholt

Active Member
Joined
Dec 21, 2015
Location
Carlstadt, NJ
Flarecons need to talk to other flarecons or d-fi's. If you put another showbaby AT the freedom pars you could wire it to one and I believe you can set one to serve as a transmitter to talk to all the other fixtures but as far as I know you can't get the show baby to talk directly to the freedom par wireless, without a wired connection to one of them first.
This is correct. They use two different wireless protocols.
 
  • Like
Reactions: RonHebbard