zackconn44

Member
So I have a city theatrical Showbaby Wireless DMX 6 attached to my etc ion. I was wondering if that could connect to the wireless Chauvet FlareCon that is contained within each freedom par. I know they both run on the same frequency so how would I make them communicate?
 
Flarecons need to talk to other flarecons or d-fi's. If you put another showbaby AT the freedom pars you could wire it to one and I believe you can set one to serve as a transmitter to talk to all the other fixtures but as far as I know you can't get the show baby to talk directly to the freedom par wireless, without a wired connection to one of them first.
 
Flarecons need to talk to other flarecons or d-fi's. If you put another showbaby AT the freedom pars you could wire it to one and I believe you can set one to serve as a transmitter to talk to all the other fixtures but as far as I know you can't get the show baby to talk directly to the freedom par wireless, without a wired connection to one of them first.

This is correct. They use two different wireless protocols.
 

Users who are viewing this thread

Back