Curious if anyone has some experience with less-than-typical socapex pin-outs.
I'm working through the 'bad' pile from before my tenure.
I found some 14/14 socapex (1k cable) that everyone dismissed as garbage.
Strangely, it's the pin-out that makes no sense, while the cable is perfect.
Instead of a typical 14/14- (being 6xH, 6xN and then 2x Grounds with a ground ring)
It has 6 Hots, 6 grounds, and pin 19 connected
All of the Neutral connections were left open.
I plan on re-soldering it to make use of the cable, but I can't find any information about this pin-out on the Almighty Google machine and I'm intensely curious what this could have been used for.
Thanks for any help =)
I'm working through the 'bad' pile from before my tenure.
I found some 14/14 socapex (1k cable) that everyone dismissed as garbage.
Strangely, it's the pin-out that makes no sense, while the cable is perfect.
Instead of a typical 14/14- (being 6xH, 6xN and then 2x Grounds with a ground ring)
It has 6 Hots, 6 grounds, and pin 19 connected
All of the Neutral connections were left open.
I plan on re-soldering it to make use of the cable, but I can't find any information about this pin-out on the Almighty Google machine and I'm intensely curious what this could have been used for.
Thanks for any help =)