Hello all!
I am trying to trigger the Ion with Qlab. Currently this is what I have everything set as:
For the Ion:
MSC Receive: Enabled
MSC Transmit: Enabled
MSC Receive Channel: 1
MSC Transmit Channel: 1
For the Qlab:
Using a M-Audio Midisport USB Uno Sound card.
Under system preferences ---> Remote Control---> I have "Use MIDI Show Control" & "Use MIDI Controls" checked. Use Device ID has been set as both 1 & 126.
Under system preferences ----> MSC ---> Patch 1 has been patched to the USB device.
I then insert a MSC cue into the workspace. And under "MIDI Show Control Message" I have the appropriate output patch selected. Command Format is Lighting (General). Command is GO. Device ID is 127. Q No is 1, Q list is 1 & Q Path is 1.
I am trying to trigger Q 1 on my Ion, but haven't really had any luck so far.
I can trigger the same cue on the Ion using Show Cue System. Not sure what I am missing with Qlab. First time using Qlab. So I am hoping someone can help me out!
Thanks guys!!
I am trying to trigger the Ion with Qlab. Currently this is what I have everything set as:
For the Ion:
MSC Receive: Enabled
MSC Transmit: Enabled
MSC Receive Channel: 1
MSC Transmit Channel: 1
For the Qlab:
Using a M-Audio Midisport USB Uno Sound card.
Under system preferences ---> Remote Control---> I have "Use MIDI Show Control" & "Use MIDI Controls" checked. Use Device ID has been set as both 1 & 126.
Under system preferences ----> MSC ---> Patch 1 has been patched to the USB device.
I then insert a MSC cue into the workspace. And under "MIDI Show Control Message" I have the appropriate output patch selected. Command Format is Lighting (General). Command is GO. Device ID is 127. Q No is 1, Q list is 1 & Q Path is 1.
I am trying to trigger Q 1 on my Ion, but haven't really had any luck so far.
I can trigger the same cue on the Ion using Show Cue System. Not sure what I am missing with Qlab. First time using Qlab. So I am hoping someone can help me out!
Thanks guys!!
Last edited: