HLlovesPyroLX
Member
Hey there Lampies,
So I have a pair of Lycian Superstar 1275 spots in my theatre. I have NO idea how old they are but the they are in pretty good shape. Until recently. One of them has started having a flicker and loss of output with in the last few months. It only happens once in awhile. I've replaced the lamp about 600 hours ago. I've also just taken the spotlight in question completely apart and dusted cleaned it from one end to the other. (This had never been done before.) It was working fine since I gave it some TLC, but then during tonight's' show it started acting up again, after running for about 30 minutes. Nothing appears burnt on the PCB, or servo motors. Internal cabling all appears fine. Fans are all working.
I am concerned it may be the ballast.
I would appreciate any pointers on where/how I should even begin to troubleshoot the electrics. Or any other advice.
Thanks in advance!
So I have a pair of Lycian Superstar 1275 spots in my theatre. I have NO idea how old they are but the they are in pretty good shape. Until recently. One of them has started having a flicker and loss of output with in the last few months. It only happens once in awhile. I've replaced the lamp about 600 hours ago. I've also just taken the spotlight in question completely apart and dusted cleaned it from one end to the other. (This had never been done before.) It was working fine since I gave it some TLC, but then during tonight's' show it started acting up again, after running for about 30 minutes. Nothing appears burnt on the PCB, or servo motors. Internal cabling all appears fine. Fans are all working.
I am concerned it may be the ballast.
I would appreciate any pointers on where/how I should even begin to troubleshoot the electrics. Or any other advice.
Thanks in advance!