SamSam
Member
Long-time Lurker, first time poster.
Recently took over a space with a 15 yr old Unison system.
It controls house lights, warmers, and works with various screens, buttons, and switches as you might expect.
Various presets for things that dim, smooth fades between.
Switches/Buttons and relays for works.
The dimmers and relay trays for these lights are spread out across the same dimmer racks and CEM modules as the rest of the dimmers in the building.
___
I just experienced an issue that, it seems "from time to time" (anecdotally from other staff), the system loses its timing and the house/warmer buttons all snap to the looks at a zero count.
Just pressed House 1/2 and it snaped out rather than its usual 3-4sec fade
____
The system, racks, and nodes are all Net2
Cueing is happening on an ION with sACN and Net2 enabled
All other dimming, and control of House Light dimmers on ION fade as expected.
I expect to call ETC once ive collected enough information to have an intelligent discussion about the problem and there isn't a show teching. I also need to get my hands on a PC/Floppy that can get me into the config if there are any other larger issues.
Thanks for any advice from longtime Unison users
Recently took over a space with a 15 yr old Unison system.
It controls house lights, warmers, and works with various screens, buttons, and switches as you might expect.
Various presets for things that dim, smooth fades between.
Switches/Buttons and relays for works.
The dimmers and relay trays for these lights are spread out across the same dimmer racks and CEM modules as the rest of the dimmers in the building.
___
I just experienced an issue that, it seems "from time to time" (anecdotally from other staff), the system loses its timing and the house/warmer buttons all snap to the looks at a zero count.
Just pressed House 1/2 and it snaped out rather than its usual 3-4sec fade
____
The system, racks, and nodes are all Net2
Cueing is happening on an ION with sACN and Net2 enabled
All other dimming, and control of House Light dimmers on ION fade as expected.
I expect to call ETC once ive collected enough information to have an intelligent discussion about the problem and there isn't a show teching. I also need to get my hands on a PC/Floppy that can get me into the config if there are any other larger issues.
Thanks for any advice from longtime Unison users