MPowers
Well-Known Member
I have been tasked with the repair and refurbishment of a few of a small number, of a local theatre group’s lighting units. Although I did a lot of lighting in my early years, the last time I really worked lighting, other than to install dimmers and various control panels around the house and back stage, was roughly 1984-85. They are all conventional as opposed to LED. I have a few questions if anyone can help me.
1. One of the units is an ETC, source four ellipsoidal, but for the life of me I can’t find any marking or label to tell if it is a 5 degree or 10 degree. See photo. Any clues?
2. There are about a half dozen 6” fresnels, old style, need a med PF T-20 lamp. Looking for a source for the lamps.
3. There are 3 units that look like a standard 6” fresnel but have been converted to a double ended TH lamp. I think it is an EHR , the marking on the lamp ends is rubbed off. Looking for a source for the lamps.
Just looking for a bit of help. TIA for any info.
1. One of the units is an ETC, source four ellipsoidal, but for the life of me I can’t find any marking or label to tell if it is a 5 degree or 10 degree. See photo. Any clues?
2. There are about a half dozen 6” fresnels, old style, need a med PF T-20 lamp. Looking for a source for the lamps.
3. There are 3 units that look like a standard 6” fresnel but have been converted to a double ended TH lamp. I think it is an EHR , the marking on the lamp ends is rubbed off. Looking for a source for the lamps.
Just looking for a bit of help. TIA for any info.
Attachments
Last edited: