Wireless Lav plug wiring

firewater88

Active Member
I have several AKG transmitters that need new lavs. Love the Countryman B3's for our applications here. Found some lavs IN STOCK at a retailer for the Audix transmitter. They both use the TA3F connector, but the Audix uses a 6.8k resistor between pin 2 and 3 whereas the AKG is just jumper connected.
So, what would happen if I used the one with the resistor on the AKG? Would I get sound? Would it damage anything?
Might just buy them as they are in stock and one up the connector and cut out the resistor and solder in a jumper.

Just kinda curious...

TIA
 

Attachments

  • B3_AB.png
    B3_AB.png
    12 KB · Views: 74
  • B3_AK.png
    B3_AK.png
    10.7 KB · Views: 72
It might work, but Countryman knows how to make their mic sound best. I doubt they would make and stock two models unless it is necessary.
 

Users who are viewing this thread

Back