Belaying

This term refers to any of several methods of creating friction on a line (rope).

Belaying to a Cleat:
This method comes from sailing and moves into stage rigging. This describes the method of affixing a line to a traditional cleat. The idea is to allow movement (limited friction) on the line until you have it in/out as much as you want before creating enough friction to hold it in place.

How to Belay to a cleat (The Cleat Hitch): (Refer to the Article Knots for terms)
1) Take a Bight around the first horn on the cleat (If the cleat is facing up and down on a wall [upright] with the line coming from above, this would be the bottom horn [ie the horn on the opposite side of the load]).
2) Take a Bight around the second horn on the cleat.
3) Cross the centre of the cleat.
4) Take a Second Bight around the first horn.
5) Cross the cleat again.
6) Underhand loop (Half hitch) around the second horn, and pull tight. This will lock the line.

proxy.php


Belaying to a Pin:
This comes from tall ships with their pin rails, and moves into the world of stage hemp flys. It is in essence the same thing as belaying to a Cleat.

Belaying down a cliff:
Belaying also refers to several methods used in mountain climbing...(Use of proper belaying devices and the munter hitch..??..)

This page has been seen 1,292 times.

Industry Advertising

Recent Activity

Readability Information

An automated review of this page attempts to determine its readability in English (US). The page contains roughly 233 words across 17 sentences.
Readability score
76.73
Readability score: 76.73
Grade level
6.0
For the information in this page to be accessible to the widest audience of readers, both a high readability score and a low grade level are ideal.

Icon Legend

  • Normal page
  • Color code

    • Content has new updates
    • Content has no updates

CB Advertising

Back