Just be careful with those shutters. They are VERY easy to break. Actually received one with a couple broken shutters. The good news is that they are very easy to replace and Apollo was awesome about sending me out replacements.I am in the same spot you are right now with just two. Working...
Martin Mini Macs for sale. Units include original boxes, and power cord. $3,000 OBO + shipping.
Great for a DJ rig or for reproducing Mac 2k gobos on a smaller fixture.
Includes:
(4) Mini Mac Maestros of grey color
(1) Mini Mac Maestro of white color
(1) Mini Mac Profile
(1) Mini Mac...
Hey guys,I have a good old boy ETC Sensor SP-1220A 12 x 2.4K Portable Dimmer Pack with 2 bad fuses in the MPE. The standard 20mm fuses I purchased in the exact amperage and voltage didn't fit. Any idea if these are odd ball fuses? Any insight is appreciated. Thanks!
Thanks for the feedback from everyone. I guess I should now ask if anyone wants to buy a well conditioned and Martin certified Mac 250 K minus a PCB? :)
Hey guys,
I have a bad PCB that was sent back from Martin. They quoted a board replacement at $1,700. I see replacement boards on-line for other mac250s but not the Krypton. Any idea if say a Entour PCB is the same as a Krypton one? Just looking to replace this thing at under their asking...
I replaced all 3 fuses. Now here's what's odd... the 2amp fuse immediately blew when I powered back up. Replaced the fuse again just to see if it was a bad fuse, same thing happened.
Is it possible I have a short somewhere? Thoughts?
Looks like I blew a 2Amp / 250v fuse on the power supply on my Mac250K.
Symptom was that the LED was not lighting up. According to the manual you should want 3 green LED indicator lights on the board. After replacing the blown fuse, I only see one and have no LED display on the outside of...
I think TVs are out because we are talking bars here with liquids and idiots around them :) Also... remember the budget constraints here: $300-500 per bar.
Unless I found a chinese knockoff of the COLORado, those are probably out. The plexiglass idea is interesting, but sounds very labor...
Thank you for all the great replies. We tried a cheaper version of the Chavent fixture w 1w bulbs, didn't really get the punch we were looking for. Problem with the actual COLORado is that it's a $800 fixture, and it's tough to justify spending that when you are pricing out the bars for less...
Looking to defeat an age old dilemma for our company and come up with a better design. Need some help from the resident geniuses. We constantly get the request to have LED bars lit from within for corporate events (the hotels roll in there bar inside of our wooden structure that lights from...
re: "All-On" switch for Sensor+ Dimmer
Thanks guys. This was a big help. Any idea how to configure the dipswitches to ALL ON for the entire 12 channel dimmer?
Have a really stupid question here. I am using a Sensor+ Dimmer. SP1220A+ 12 x 20a Portable pack w Edison.
What I am trying to do is set Dimmers 9-12 as on and non-dimmable for use with my moving lights (and disco ball spinner) on the Socapex I am using fanned through the edison outputs...
I've seen a bunch of these on the net for sale used recently. I know finding personality files on these seem to be tricky. Has anyone worked with them and how would you compare them to say a Martin Mac 575 Profile? Actually saw them used with road case for $900.