JustAShadow
Member
Greetings All,
I am currently working on a K2 English Phone Box for a production and have run into a slight hiccup with the roof. My new plan to create the dome is to cut strips of 1/8" ply perhaps 2" wide and layer them over the roof frame to achieve the needed curve. Any other suggestions or advice would be greatly appreciated.
Thanks for your time.
![561508_766826980597_592564468_n.jpg 561508_766826980597_592564468_n.jpg](data:image/svg+xml;charset=utf-8,%3Csvg xmlns%3D'http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg' width='403' height='403' viewBox%3D'0 0 403 403'%2F%3E)
![398173_766819171247_62856467_n.jpg 398173_766819171247_62856467_n.jpg](data:image/svg+xml;charset=utf-8,%3Csvg xmlns%3D'http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg' width='403' height='403' viewBox%3D'0 0 403 403'%2F%3E)
![images.jpg images.jpg](data:image/svg+xml;charset=utf-8,%3Csvg xmlns%3D'http%3A%2F%2Fwww.w3.org%2F2000%2Fsvg' width='185' height='273' viewBox%3D'0 0 185 273'%2F%3E)
Edit to add: The roof of the phone box measures 37" square, the face pieces have a radius of 30" and the top of the dome has a radius of 36" and the peak of the dome is 4 7/8" above the peak of the face.
I am currently working on a K2 English Phone Box for a production and have run into a slight hiccup with the roof. My new plan to create the dome is to cut strips of 1/8" ply perhaps 2" wide and layer them over the roof frame to achieve the needed curve. Any other suggestions or advice would be greatly appreciated.
Thanks for your time.
![561508_766826980597_592564468_n.jpg 561508_766826980597_592564468_n.jpg](https://www.controlbooth.com/data/attachments/5/5779-5d494a3d352f9a748e5551fdf4fa064e.jpg)
![398173_766819171247_62856467_n.jpg 398173_766819171247_62856467_n.jpg](https://www.controlbooth.com/data/attachments/5/5780-24968c05eca5053bd7919760a866ce9c.jpg)
![images.jpg images.jpg](https://www.controlbooth.com/data/attachments/5/5778-31c10480964feea9575c6e9db9ca6b8b.jpg)
Edit to add: The roof of the phone box measures 37" square, the face pieces have a radius of 30" and the top of the dome has a radius of 36" and the peak of the dome is 4 7/8" above the peak of the face.
Last edited: