-
-
Sship replied to the thread Scenery Stage brace hardware..I have never used the stage screw. See the holes and have at times seen the stage screw floor insert on a deck. Wondered about the...
-
SJust ran across an empty bin that wound up in my department marked as such labeled for the bolts to be stored within it.Fascinating...
-
SPipe is measured by it's internal diameter. Tube is measured by it's outside diameter. This is a common problem which I resolved by...
-
Sship replied to the thread Scenery Stage brace hardware..I have a few boxes of stage brace hardware and Oak is the wood.. I don't have the center clamp, but do have each end fittings for good...
-
Sship replied to the thread Martin Lighting MAC 2000 Profile II.You kept in initial post saying DMX. Sorry we didn't catch that I'm sure for all in new line of thought. Start with power on and self...
-
Sship replied to the thread C-clamp part needed.I mispoke ohttps://www.mcmaster.com/91416A210/n the part. Though I believe I have bought some grade 5 versions in the past.
-
Sship replied to the thread Martin Lighting MAC 2000 Profile II.I see good condition B&M lamp sockets and Phillips lamps both without indications of a lamp/socket problem,. For this one. Onto the...
-
Sship replied to the thread C-clamp part needed.Agreee with gafftaper on observation. Believe this is the part https://www.mcmaster.com/91375A576/ in specication standard for it...
-
S@Matthew Peters bonus points to you from the CB staff. This is exactly how we like people who represent companies to act on CB. You...
-
Sship replied to the thread High End Technospot Lamping Off.Lamp Dousing is the term.Do the easy first in verifying the lamp and socket is not the problem. "Paul Rabinovitz"...
-
Sship replied to the thread Martin Lighting MAC 2000 Profile II.Look at the lamp sockets, more important the lamps replaced. Putting a perfectly good lamp into a bad socket won't make it work...
-
Sship replied to the thread Conventional Fixtures Micro Ghost Lights.As with my department and years ago gun crew, if an overwhelming part has an idea not mine, we go with that. Design away something to...
-
SThere are various strainer parts that go in this direction, but I haven't seen anything standard that I think would be appropriate.I...
-
Sship replied to the thread Conventional Fixtures Micro Ghost Lights.I'm for the moment keeping looking with time on doing so - touring season/very busy. Something in mind I have seen to the extent of a...
-
-
Loading…
-
Loading…
