Recent content by jgels

Hi all, So we have a bunch of colorsources that we have programmed colors for our show on. We don't have any but are going to a festival where we need to match our colorsources colors with a lustr. If we just put the same values into red green and blue, will we get the same colors? Thanks

Thank you all. Apparently all the dip switches needed to be down for DMX 1 and I am now connecting to the right pins! IT is working!

The guy who sold it to me set it all with the internal jumpers to be in the correct mode I believe. Will play around with some of these possibilities now and report back

Ok so I got the Leviton/ NSI IF-501. I got a dc current dynamo. cant figure out what im doing wrong with my set up. Basically it goes dynamo, resistor to not get voltage too high, to the analog pins going into the box. Then from the box dmx to our lights.Basically we got the analog pins going...

BTW I quickly googled you and you work for MY preferred vendor.

Everything is currently hardline dmx cable. We have a black box space so the idea of sticking something backstage and running stuff is sketchy. Something that could be clamped to a pipe and run would be way better.I don't know what vendor we have for the Ion XE, that is being handled on the...

It seems like the ETC Colorsource relay may be what I'm looking for with the gateways?

Hi all, So right now I am working with an ETC Element board. I should have one of the new ETC Ions coming once they are not as on back order.I have been given license to try and put together an ask up for to 10,000 dollars of stuff for my space. I know I want to do the following:Some dmx...

Thanks for all the assistance everyone

Thanks so much!

Hey all, I have a very particular lighting challenge for a show I am working on. In the show we are going to be using a bike and a dynamo to create a small electric charge. The ideal is that we can then use this charge as an analogue signal and convert it to a dmx signal to control some lights...

Ok. Considering they aren't really my lights and there will be 2 more shows after mine, I will probably try and avoid anything that would potentially burn out bulbs. Especially since I would need to also do the rest of my own show after.

Hello all, So here is our situation. For a storm effect we are using a strobe effect in led lights in our own space, however, we have a high school drama festival and our site just doesn't have the new infrastructure. So my question is:Using old school non-led source fours and an eos board...

Thanks this is all great. We ended up actually reorienting the room completely so we got a bit more ceiling height but will def look at these too

Thanks all. I think I am gonna go with a base laptop and it will also be one of my touch screensOk so it looks like this guy may do the trick. https://www.amazon.com/dp/B077SKWTXL/?tag=controlbooth-20 except it doesn't seem to have an ethernet adapter. It is proving hard to find a touchscreen...