I apologize for my ill advice, it seems Nsimmons is correct and I was misinformed on this topic a few years back when first exploring MSC and qLab. Thank you for the clarification! :)
There is also the Sennheiser LSP500http://en-us.sennheiser.com/sound-systems-wireless-loudspeaker-lsp-500-proIt's completely battery powered. Modular and can be expanded later. Works with most Sennheiser G2 receivers if you already have a set.
Saw them demo'd at InfoComm this year and was...
Hey,So, basically you want to load cue list 1 onto a desired Fader on the wing, and the two buttons are your GO and STOP/BACK button. Then Load your cue list 2 (Video triggers) to master fader on the console.Then you can execute cue list 2/x from the List 1 and it SHOULD send midi go's to...
Hey Taylor,I did a show in the Spring with this identical setup and had the same issue. - The ION will only send a "GO Cue X" from what ever is loaded onto the Master Fader. So if you load Cue 2/ onto the master fader and run your main show from a Fader Wing (I Know, tedious and PITA)...
I've had luck in the past with a DMX control board and a servo (think of the kind that drive a color wheel in a moving light). I think Fleenor may actually sell the DMX circuit board and you just need to provide a 12v DC PSU and a servo that will respond accordingly.
I would reccomend a 100' socapex to run 6 circuits from the visitor center to the stage area and then break out from there. Nice clean run that way.Also, LEDs will be your best friend here. Is this a one-night event? renting a console will run you minimum $250-300.I actually used to live...
Ok.. so check this out which you can pick up at pretty much any guitar center or online. $350It's a 16 channel DMX controller with (2) 4-Channel DMX dimmer/relay packs. This can get you 8 channels pretty easily, and if you buy another box at the store for about $120, expand to 12 channels...
How many channels do you need the Cue Light system to be? How spread out are the locations needed for them. - I've built a 10 channel cue-light system on about $800-1000. It worked perfectly for the production, and since it was temporary and everything was Low Voltage, I was able to use 14 AWG...
Try this. Merge this showfiles fixtures into your current showfile.Change the patch TYPE of the fixtures to this custom fixture type.Should fix the issue for you.What I did was copy the original, then changed Zones 2-4 "RGBW" channels to R2, G2, B2, W2, R3, G3...B4, W4Giving you...