Recent content by Péo Durand

Thanks for the help guys, I think I found the culprit: the wire are a bit loose in the 4 pin connector, I called my VL dealer and he suggested I cut the connector and solder the 4 wires together. I'd like to keep a junction cause it's much easier for maintenance, have you ever replaced these 4...

Hey Y'all,I have a few fixtures in my rig that won't open the V-Brite (fresnel lens), sometimes they open and won't close or just won't budge at all. I suspect the motor is getting tired, or something wrong with the screw the motor is on.Anybody ever had that problem? The fixtures are 3...

When the the output goes to zero, the dousers shut themselves so no light output to the wheels. Even if the dim wheel is the furthest wheel away from the lamp, you think the heat could've burnt the wheel?

Hello Y'allI have three VL dim wheels that seemed to have burned a circle in the shading (see picture). We are a touring circus show in tent, I would think condensation then the heat of the lamp burned the shading, since we turn off the movers at night.Has anyone experienced this in the past?