Recent content by tbrennan

Yes, I have a Clearcom base station for one system and a Telex power supply and telex btr-800 wireless base station for the other system.I wish to interface the Telex/RTS XO-1 Beltpack/System with both these system, depending on what theater we are in.

Could maybe a inline pad of some sort be added to correct that issue?

Oh Darn- What output did you use?I was thinking it would work because both system I am interfacing have the same 4-pin headset output and use the same model headsets.

Hi There,I am trying to interface a Telex/RTS XO-1 Beltpack/System with a wired Telex or Clearcom System, I was thinking of having a cable built that would interface the systems via the belt packs 4-Pin XLR headset connector, I can spare a a beltpack from each system to use for interfacing...

Yes, all receivers/transmitters are tuned to avoid local TV, Our IEM's, and Public Safety Radio Systems in our area.

Thanks.I had issues with fuzzing and dropouts when all 5 systems had there antennas just in the back of the rack, so I went with a Shure DA that also helped neaten up the install very much. Now, I am looking for a small set of antennas that will cover the band, and I can just connect to the...

Hello,I have a small wireless rack with 2 Shure ULX (500mhz) and 3 Sennheiser G2 (660mhz) systems. They all go though a Shure Antenna Distribution Amp. Shure said that you can mix ranges and brands on one DA. Now, I am looking for a set of antennas for the system, I know the Shure Paddles...

Re: HELP! Chauvet Obey 40 won't talk to LEDrain 56 cansHiI'm not sure if this helps..Before we switched to Hog 3PC, we used some Chauvet Obey boards. I had the same issue. I had to select a fixture number on the bottom row (There should be about 12 of then, If you select #1, The faders...

Hello, This post is very similar to what I am having an issue with;We just bought a used ETC Concept board. It has 2 RGB DB9 outs and 2 BNC Monochrome outs. I would like to just hook this up to a Display with a A/V Compostie in. I have a BNC Cable and a RCA to BNC Adapter. However, I plug it...

Hello,I recently purchased a used ETC Concept Board. It supports 2 RGB or Monochrome displays. The RGB Connector is a DB9 and I would like to use a VGA Display. How would this be done?I also used a BNC to RCA adapter to hook up the Monochrome Out to a LCD TV. All I got were lines.I...

We use all Shure systems. Try the Shure ULX or Shure SLX systems.

Hello, Would the RFU2-EXPN model RFU by ETC work with an Express 48/96 board?Thanks.