Recent content by zwhite93

I have recently been using QLab on a Mac mini, firewired to a Presonus Studiolive and it is working great. You need to follow a boot order to make sure QLab recognizes the mixer as an available out, but once you get that down, things work fine. Keep in mind that the cheap (formerly free) version...

I didn't bridge any of the tip, ring, or sleeve. I've already re-soldered the cables with mono plugs, but I'm assuming I had the wrong combo of T/R/S. It puzzled me to start with because I tested continuity and all was fine. Its good now, but thanks for your input.

First, thanks for your prompt and detailed reply. Second, I'm a moron. I made my own speaker cables. I bought stereo 1/4" plugs instead of mono. The more I thought about it, the more I knew something wasn't right. Third, I just replaced the stereo plugs with mono plugs, and the thing works...

I just picked up a Yamaha EM-150ii and 2 12" 3-Way passive cabs. When I run a mic or iPod into a channel, the meters on the board indicate so. However, I'm not getting anything out of my speakers. I've tried plugging them to Monitor 1, Monitor 2, Speaker 1 L, Speaker 1 R, Speaker 2 L, Speaker 2...