Ls9/Dante question

[Kevin Cole]

I am currently working on a yamaha ls9. The outputs our sent through Dante (cat5 cable) out of our console, to our amps, then to our mains. It is also sending mix 1-6 to 6 outputs on stage for auxiliary outs.

I was wondering how I could use a different mix. (Anything form 7-16) to output directly out of the back of the la9 from the omni out ports. We are trying to film our current production and the camera guys would like a direct line to our board.

Also sorry for the lack of/ bad information I'm not to familiar with the new system our school installed.

Thanks for the help!

 

[MrX]

Check out Chapter 9 in the manual (page 95 of the version I have). It's very easy to assign omni outputs to anything you want.
If you don't have the manual, you can download it here.

 

[DaveySimps]

You can assign any output to any omni out port. Press the "Setup" button on the upper left of the board until you get to the omni out patch screen. It is pretty straightforward. If you need help, feel free to email me your Studio Manager file, and I am happy to help you with the routing.

~Dave