Rosco 3000 Fog Machine

[hamlett22]

HI

I just pulled out our Rosco 3000 for Beauty and the Beast. AS you know this model has high output. But even at 100% today, she struggled and I think it is clogged up. I'd like some advice on how to clean the machine. Do I need to take it apart? Soak the nozzle in water or soap? What is the process or best steps in cleaning this model?

Any advice is appreciated.

thanks
hamlett22

 

[sk8rsdad]

According to the manual (emphasis added):

Before and after the machine is stored for an extended period, the machine should be
properly cleaned. The best method for cleaning is using distilled or de-ionized water. To flush
the machine, turn it on and, when ready to use, put the fluid pick-up tube into a container of
distilled or de-ionized water. Run the water through the machine and flush for three minutes.
The tube should be removed from the water and the machine run until nothing comes out of
the nozzle. The machine should be immediately turned off.​

 

[MattRosco]

Hamlet,
Please give Rosco Tech Support a call at 1-800-767-2669 or 1-800-2651 (LA).

-Matt @ Rosco