fluorescent dimmer modules

[robmerow]

I'm currently working with a small theater to install a dimmer rack they received through a donation. Most of the modules are standard dual 2,400w rated for "inductive loads", but there are a handful 2,400w modules rated for "fluorescents".

So my question is:
1) Will the florescent modules work for dimming conventional tungsten instruments?
2) If so, is there any potential damage that this will cause the module or the lamps?

Thank you.

 

[robmerow]

It is an EDI MX Rack (now Cooper Controls MX Rack) . Here is a link to the module if that helps.
http://www.cooperindustries.com/con...g_controls/dim_prod/mods/unvsl_fluor_mod.html

 

[Chris15]

Looking at the linked product page, this is not a standard mains dimming module.
It provides undimmed power and a control signal, selectable as 0-10v or 0-120v.
The idea being that you connect it to fluorsecent dimmable ballasts or similar control devices.

I think you're out of luck wanting to use them for standard fixtures.

 

[robmerow]

Thank you - that was our assumption.

 

[microstar]

The spec sheet seems to indicate they can be profiled as a non-dim, so that will be worth verifying. Useful for LED fixtures, etc.

 

[RickR]

If you want the real info contact Alan at http://ediserviceandrepair.info/
He was a primary engineer with EDI before the buyout. The man knows the gear!