GreyWyvern
Well-Known Member
Looking at the instructions, found here, I know how to properly wire it in a normal situation, but this isn't normal. The dimmer I have is a Lutron NTSTV-DV. The LED driver control is in a separately powered box, so the power doesn't need to run though the dimmer. I know I need to connect the 0-10 VDC wires to the driver control, but what about the black wires on the dimmer? Do those need to be hooked up to power? Will this dimmer even work?
This is a project that I shouldn't really be involved in, but am doing, because, well, someone has to make things work. I was literally handed the dimmer and told, "This is what we'll use to dim *these* lights." That is as far as it had been thought through. This is actually one of two, but the other was a normal 120 VAC dimmer and was also for a unique situation, but I was able to come up with a pretty ingenious solution for that.
Thanks.
This is a project that I shouldn't really be involved in, but am doing, because, well, someone has to make things work. I was literally handed the dimmer and told, "This is what we'll use to dim *these* lights." That is as far as it had been thought through. This is actually one of two, but the other was a normal 120 VAC dimmer and was also for a unique situation, but I was able to come up with a pretty ingenious solution for that.
Thanks.