Dead Thread back to life:
We have to hang a schedule 40 1.5" pipe from an airwall track.
The airwall hangers are rated at 500#, and are the correct ones for this track.
http://airwallhangers.com/specs/TITAN XL40 - 2011.pdf
2 methods proposed:
1. remove the eye from the bottom of the airwall hanger, remove the bolt from a c-clamp, screw the c-clamp onto the airwall hanger bolt. The c-clamp is now upside-down, compared to how it is normally used to hang a light from a batten. Lay the pipe into the c-clamps, snug up the bolts.
2. keeping the eye on the airwall hanger, attach a shackle to the eye, use the shackle to connect a batten clamp, hold the pipe in the batten clamp.
I prefer method 2, but was told method 1 "would be fine".
and.... discuss!
**MOD Note** Posts moved from Lighting Forum.
We have to hang a schedule 40 1.5" pipe from an airwall track.
The airwall hangers are rated at 500#, and are the correct ones for this track.
http://airwallhangers.com/specs/TITAN XL40 - 2011.pdf
2 methods proposed:
1. remove the eye from the bottom of the airwall hanger, remove the bolt from a c-clamp, screw the c-clamp onto the airwall hanger bolt. The c-clamp is now upside-down, compared to how it is normally used to hang a light from a batten. Lay the pipe into the c-clamps, snug up the bolts.
2. keeping the eye on the airwall hanger, attach a shackle to the eye, use the shackle to connect a batten clamp, hold the pipe in the batten clamp.
I prefer method 2, but was told method 1 "would be fine".
and.... discuss!
**MOD Note** Posts moved from Lighting Forum.
Last edited by a moderator: