Recent content by etskinner

  1. E

    Replacement base for Strand Century 2321

    Looking for a replacement base for an old Strand Centry 2321, see photos. Any ideas on where to look?
  2. E

    Strand 520i - Can't set levels of channels over 200

    Hey guys, just wanted to follow up on this thread, I know how frustrating it is when a thread starts and then the solution isn't posted.Here's what we did to fix the problem:After loading a different config/show file, the problem went away. There were several files on the console that would...
  3. E

    Strand 520i - Can't set levels of channels over 200

    Thanks for the ideas guys, I'll try them out and report back
  4. E

    Strand 520i - Can't set levels of channels over 200

    I'm having a weird problem with my theater's Strand 520i. Channels over 200 show on the channel screen, yet cannot be controlled. For example, Typing "250 ON" or "250 (turn wheel)" or "250 @ 50" each don't do anything to 250. However, these channels can be controlled by the subs they were...
  5. E

    Strand 520i - How do I release captured channels back to subs or playback?

    Yeah, that's good and all, but on the 520i it only undoes the last thing if you don't give it any channels. What I posted above fixes that.
  6. E

    Strand 520i - How do I release captured channels back to subs or playback?

    Yeah, I discovered that about a month ago while trying to figure out some IL's. I've read all over those things.I finally figured it out while working on the board this evening!As the help documents on the console describe:It says that the second one is a 2 second fade but that is...
  7. E

    Strand 520i - How do I release captured channels back to subs or playback?

    First off, thanks for the quick response.As for your question about my example, channel 1 was meant to be just from the cue, and channel 2 was meant to be just the submaster. The problem is that when I hit 1[@][ENTER], channel 1 will go to zero, not to the one set by the submaster like I want...
  8. E

    Strand 520i - How do I release captured channels back to subs or playback?

    Newbie light op here looking for some help. I've searched these forums and the internet, to no avail.I'll start out with channels controlled by playback, say channel 1 is set to full in cue 5 and I've gone to cue 5. Then lets say I have channel 2 in sub 1 and I've brought the sub up to 50. So...
  9. E

    Strand 520i Bad Wheel

    We have a Strand 520i console that's several years old and the wheel doesn't operate quite right. It's not sticky or anything, but when brought to a value and then let go of, it rolls back slightly. For example, when I bring something up to full and then let go, it'll drift back down to about...
See more
Back