Recent content by Kody

Hey All!Our theatre is currently working on a $2.5M expansion at our Front of House.We are wanting to implement a system with Digital Signage in the lobby. We would like the ability to switch over to a live feed from a camera in the auditorium as well.We are looking to be able to mount TVs...

Hey Guys,We recently purchased 8 x Chauvet Mk1 Hybrid.We are having issues finding a way to properly attach the clamp to the OMEGA Bracket.We are attempting to use the LightSource Slim Claw that has a bolt which gets threaded into the clamp.The bracket has a recessed hole which means...

So then my best short term option would be a few runs of Cat5 with Rj45 connectors on both ends with a HDMi converter on either end or whatever source I need. What do you mean by "proper network" ?

Yeah thats what I was thinking for a Temperary Solution. Long term tho, we want them permanently installed at different points on stage, dressing room and the pit. Thank you both for your help

Our current set up is a Mac Mini, BlueRay, DVD player going into a Edirol V4 and thats going up to the projector. A few years ago we had a new sound system put in. So we currently have Mics, Intercom, Monitor, Cat6 Audio Network already installed, they failed to include any kind of video (I was...

We are looking into installing A/V panels on stage to run up to the Tech Booth. What do you guys have? Could you share some pictures of your panels? We are hoping to install HDMI, VGA, BNC, Ethernet ports on stage to run up to the Tech Both. Any ideas?

Im looking into some options for video input on stage sent through our AV data lines to the booth? It is just a RJ45 connector on both ends. So I need a video balun that sends (VGA, HDMI, etc.) over Ethernet and converts back out in the booth. I know there are tons of different options out...

I’m not much of an Electrician, but how would I splice in the Relay to the existing wiring for the 3 button curtain controller? Does anyone know how they are normally wired?

We currently have the curtain control located in the booth and onstage, with (Open, Close and an EStop) we were just hopping to tie it into qlab to open after a preshow announcement or close after blackout ect.. There would always be someone in the booth to push the Estop just in case anything...

I was wondering if anyone has heard of or has built a custom Midi Curtian Controller? Im hopping to be able to open/close the main curtian via a midi signal from qlab.

Im looking into remaking our rental application and also making a new tech sheet. Does anyone have samples that I could take a look at? I want to make a sheet where the renter puts all their tech needs and was wondering what you guys have done in the past. We have alot of dance shows and plays...

I'm looking into getting about 4 of them for under $1,000. I don't need them to be the sane quality as the Source 4 Pars, they are going to be used mostly for lighting up a wall. It is a fairly high wall though, so maybe something that's has a pretty long throw. I do like the D60s but they are a...

i am looking for some fairly cheap LED pars to replace my source 4 pars. Does anyone have any suggestions