Recent content by mozsey

How my theatre does this is taking a sheet of 3/4" plywood, route a bunch of 1.5"x1" holes 2 feet apart on center. Take piano hinges like http://www.mcmaster.com/#piano-hinges/=y52hn8 and seperate the two sides. Take a hole saw and cut out a whole big enough for your casters (I can't find the...

Weird. Today I come in, and it's not making the buzzing sound, yet all my lights are functioning properly. Thoughts?

Could be the last service tech. If a phone from the 90s would fit in the rack haha.

I should note this isn't a constant buzz. It'll be BZZZZZZ silence for 10-20 seconds BZZZZZZZZ like a text message that's going unanswered on an iPhone.

No change in tone when brought to full. It's weird, I thought it was following a pattern, but now it's random. And I'm not certified, so I'm sure as hell not opening it up to take a look. And we probably won't be able to get someone to take a look at it until after this show I'm designing.

Hello there folks at Control Booth. I have a weird thing happening in a theatre I am currently designing at. I've designed in this space before, and this has never happened. Our Leprecon mx1200 dimmers, which are quite old, are buzzing/vibrating? As in, I was hard patching and when I entered...

The only problem I can see with this is that it will really only be on way unless you have it plugged into a high end mixer. I've tried this, but you can really only recieve into the computer, because of the way my usb mixer worked. It also put out a call signal, because it sends out ~12v...

If you can get someone skilled to sew something for you, with extended small sleeves for the mic/antenna, you could scotchguard the fabric pouch. Back when I was a cadet in JROTC some of us did this to our uniforms to keep us dry when we had to stand post in the rain lol.

In my opinion, I think it's a great way of getting the job done. As long as it's slid on stage straight and not rotating in any way as to not reveal the effect. Have you considered sight lines for people higher up in the house if your house is raked?

It hasn't been used because it belongs to another high school (the one I went to) and it was in storage for 3 years, and at this school for a year.

Hello all.I am currently lighting for a high school and the director wants to use a fog machine. I found the schools Omega fog machine, but I can guarantee it hasn't been used in at least 4 years. I know distilled water to clean it, but is it safe to use the fog juice that's in it? Does it...

If you have just gotten it back from them and there seems to be a problem, it seems to be a repair failure. My best guess is that they probably didn't seat a ribbon cable or similar connector in and that's why you aren't getting the display to work.Where did you get it repaired? Somewhere...

I'm going to go with whatever board the West End's production of "The Mousetrap" is using, since they don't typically update gear on long running shows.

This is a rack, sorry for the confusion about saying pack. Was in a hurry and it slipped my mind.If I switch for a good module and it still doesn't work, would I then have to suggest the school get a trained technician in to look at circuits? Would the cable runs to the circuits be a hazard...

also, if you look down on the page, it tells you how to use