Recent content by Sharkey

The switching of the modules worked great. Turns out we had a bunch of un-used basic dimming modules in non-used module sockets. All the constants we have either powered outlets around the stage or outlets on the stage floor, so no worries to cleanup crew (Even though, school Janitors don't put...

Okay, thank you everyone for your help. I will try the module swap as I know we have unused circuits!Then (if it still doesn't work), I will check to make sure the circuit is patched into it properly on the configuration, if not I'll set that module to the correct 00148 circuit.I'm going to...

C21 Advanced Technology Dimmer System | Strand Lighting - A Philips Group Brand We have the C21 dimmer with two different kinds of modules (I don't have a specific page...) One module says Basic on it, and can control two circuits. Another says constant on it, and by pulling it out and taking a...

The title mostly explains the problem. We have a -bunch- of outlets we need to be able to dim on our stage setup ( a couple backstage and a few on the front of the stage to be used for specials near thrusts ) They all have numbers on them written in none other than sharpie... we went to...

We've been using the system for days now, including the iPod app mentioned. We love it! I'm going to donate my old tablet laptop, that should be fun. I will try around with that channel key, and see what we can do. I like the idea of it being in the central location if wireless cuts out...

Wow! Thank you all for your replies. I got it to work today after a lot of work. I found the switch, it was located in a rack in a control room that's door was covered with random props and scenery. I plugged my router in, and found that the console's IP was 192.168.0.50. I set the...

Well well well! Look what we have here. strand-dev.com • View topic - (HTML JS) mote lite - webapp remote Something I can throw in my back pocket, on my iPod touch! This should help out. I'm going to try this tomorrow.

That's quite alright, HansH And, to Footer. That's exactly what I need. I don't need to surf through my cue's or looks, as that is all done on the console. All I need to do is be able to turn on/off/dim certian channels. I will try to see if I can connect to the nodes via the Chamsys...

To HansH: Yes, I want to be able to move around the stage with my laptop to control lights. Makes life easier rather than moving between booth and lights (A decent walk) every time I need to adjust something. Especially since the lighting crew consists of 2-3 showing up a day. Of course, we will...

Also, I would want to enable WPA/WPE security on the network, correct? Don't want anyone connecting to the network to attempt anything.I'll look around for a switch, if I can't find it i'll use the router as a switch. I'm sure the switch is in our dimmer racks, I just haven't noticed it yet...

Hello Footer,Thanks for your quick reply. So, I'm guessing the Ethernet from my controller board goes directly to the dimmers, or to the ShowNet nodes (The Strand Blue boxes with DMX in and out on the front). Where would I attach my wireless router to? I can easily set the IP addresses, I'm...

Hello! I'm a High School student who works on the two yearly plays we host. We have a Strand Lighting system, controlled via ShowNet.We understand that this uses a sort of network to communicate. Would it be possible to use a wireless router in between the controller and dimmers to use a...