I have toured with it now for a couple of years. Very stable and through countless setups at different theaters. The key to get
Qlab to talk to
EOS is in
System Preferences->Sharing->Computer Name: i.e. "your_computer.local" Take this name and put it in
Qlab Settings->OSC->Patch 1->IP
Address and then make sure that the
Qlab OSC Port (6000) matches the
EOS Settings->Show Control=String RX (ENABLED) and String RX Port (6000). Then in
Qlab Fire
OSC Cues that
send Raw UDP Strings and the Message looks like:
Cue 1(list#) 9(
cue#) #(end of command) or completed by itself: "
Cue 1 9 #" and that command will then fire
cue list 1
cue 9 - Cheers!