Hi there. Ok I'm still learning how to program my board in general and when I was at church the other day and the guys were talking about the TD wanting to start using the new LEDs, I got that dreaded feeling, the one where he was going to call me and ask how to do patch in DMX lines to our ion board. Our old TD did this and never explained how he did it, so I have no clue how it's done. We have some LEDs now and he just took a couple of the old ones out and put the new LEDs on that DMX line. But he wants to eventually add all of the new ones. As it is, we have the 10 LEDs daisy chained together on one DMX line. He tried using the manual but as I've seen with my own beatings with it, it's not the best written thing out there. You don't want to know how long it took me to figure out how to stop an effect based on the way the manual read (where exactly IS the stop effect button, etc?)
So needless to say me being the one that knows the board the best, and I think unofficial team leader, is the one on the search for how to do this. He's looking for easy instructions on doing this.
If it makes a difference, the new LEDs are pars, our old ones are bricks. We set the old ones up on three channels, these I have no clue, haven't even seen them yet.
THAAAAAANKS!!!!!!!!!!!!
So needless to say me being the one that knows the board the best, and I think unofficial team leader, is the one on the search for how to do this. He's looking for easy instructions on doing this.
If it makes a difference, the new LEDs are pars, our old ones are bricks. We set the old ones up on three channels, these I have no clue, haven't even seen them yet.
THAAAAAANKS!!!!!!!!!!!!