I recently wired up the house lights in our church to (5) 4-channel dimmer packs. Each pack has a dedicated 20amp breaker, and the load per channel is (7) 90W bulbs. That equals 5.25amps per channel at 120V due to my calculations. And we're only using two channels per pack because they say they're 15amp max. We bought cheap dimmer packs, Matrix DMX Pro+.
The problem is I can see slight flickering or flashing when dimmed at all. I'd even say its strobing. It's not extremely noticable, but enough to be distracting. I'm limited in my knowledge of dimmers, but I know that's not normal and it doesn't happen to our PARs which are on the same dmx run...even past the house dimmer packs. Please help.
The problem is I can see slight flickering or flashing when dimmed at all. I'd even say its strobing. It's not extremely noticable, but enough to be distracting. I'm limited in my knowledge of dimmers, but I know that's not normal and it doesn't happen to our PARs which are on the same dmx run...even past the house dimmer packs. Please help.
Last edited: