Skervald
Active Member
I'm starting to put together a proposal to purchase a personal lift. (wish me luck!) My only experience is with the larger self propelled models and I'm not certain those will work in this environment. I'm looking for any opinions or advice on the smaller models so don't be shy. Here's what I can tell you:
Primary uses for the lift would be hanging, focusing, and maintaining lighting instruments, and dead hanging draperies and backdrops in two dead hung spaces.
Typical working height is around 19 feet.
One of the spaces this would be used in is a blackbox with a sprung floor (it is blocked to facilitate the use of small riser sections and larger set pieces) The other is not sprung.
Storage is tight (surprise!) so the smaller the footprint, the better.
Thanks for your input!
Primary uses for the lift would be hanging, focusing, and maintaining lighting instruments, and dead hanging draperies and backdrops in two dead hung spaces.
Typical working height is around 19 feet.
One of the spaces this would be used in is a blackbox with a sprung floor (it is blocked to facilitate the use of small riser sections and larger set pieces) The other is not sprung.
Storage is tight (surprise!) so the smaller the footprint, the better.
Thanks for your input!