Phantom_Sandwich
Member
Im in a little bit of a predicament. I have some small 'truss mount' dimmers that are in need of repair (Elation Uni-bar). They are no longer made, and I cannot get a replacement board. I have found the issue to be the PCB mounted transformer oddly enough. There is a part number on it, however searching for it returns nothing.
I have looked through the typical electronic component suppliers that I usually use (Digi-key, Mouser) (I might add I am in the US), and searches return nothing like what I need.
The label says, and from what it looks like, there are 2x 120V inputs on the primary, and 1x 9v output on the secondary (150ma current rating). It is a PCB mounted encapsulated transformer.
I have added a photo of both sides to show what I am talking about. Does anyone have a clue as to where I can find one of these for purchase? I have always had problems identifying and replacing transformers because of their wildly different characteristics.
Any help would be appreciated
Thanks!
I have looked through the typical electronic component suppliers that I usually use (Digi-key, Mouser) (I might add I am in the US), and searches return nothing like what I need.
The label says, and from what it looks like, there are 2x 120V inputs on the primary, and 1x 9v output on the secondary (150ma current rating). It is a PCB mounted encapsulated transformer.
I have added a photo of both sides to show what I am talking about. Does anyone have a clue as to where I can find one of these for purchase? I have always had problems identifying and replacing transformers because of their wildly different characteristics.
Any help would be appreciated
Thanks!