b2550
Member
I have a set of 8x Sennheiser XS True Diversity EM 10 Receivers. Many of the antennas have had their casing broken off, and the power bricks are too big for the PSU so someone decided to plug in double-sided extension cables to fit them all and just ziptie the slack. I am trying to update this setup to a more robust solution with an ASA 214 or ASA 1 antenna splitter (and power distribution) and a compatible antenna. However I can't find any information about weather the EM 10 is even compatible with an antenna splitter.
I was hoping someone with this system could advise or send me in the direction of where I could find information. I can't even find this reciever on Sennheiser's website. The manual of the ASA 1 says it's compatible with "EM x00 G3" receivers but I don't really understand what that means.
Annoyingly Sennheiser doesn't even list the EM 10 in their support form so asking them about it is difficult. I have submitted a support request anyways and will report back if I get a response.
Also given the age of the system, lack of support from Sennheiser, and the potential for funding to replace it, might it just be worth replacing entirely?
I was hoping someone with this system could advise or send me in the direction of where I could find information. I can't even find this reciever on Sennheiser's website. The manual of the ASA 1 says it's compatible with "EM x00 G3" receivers but I don't really understand what that means.
Annoyingly Sennheiser doesn't even list the EM 10 in their support form so asking them about it is difficult. I have submitted a support request anyways and will report back if I get a response.
Also given the age of the system, lack of support from Sennheiser, and the potential for funding to replace it, might it just be worth replacing entirely?