CSCTech
Active Member
Hey guys, I recently had a thread about RFUs, and concluding that I would be out a few hundred for an RFU for our Express I reliezed I had a Chauvet Obey 10 sitting here at home in my DJ rig and I rarely use the controller, so I read up on it, and basicly it has 128 controllable channels, meant to be 16 8 channel intelligent lights. However I was wondering if I where to get a 3-Pin DMX-5 Pin DMX cable since the controller is 3 pin, and connect it to either right to the rack or second control input, would I be able to have control over the rack? And Being in 'Light 1' would give me control over dimmers 1-8 and so on? Or would I run into problems?
I do not care if the 'Rfu' I use interfaces with the board, I just am looking for a portable way to control our system. And being a 2 space rack mount, it is fairly small.
Hope this would work!
I do not care if the 'Rfu' I use interfaces with the board, I just am looking for a portable way to control our system. And being a 2 space rack mount, it is fairly small.
Hope this would work!