BillESC Well-Known Member May 30, 2023 #1 Is there a way to connect the two? Have a radio station wanting to use a mic for remote broadcasts. TIA.
Is there a way to connect the two? Have a radio station wanting to use a mic for remote broadcasts. TIA.
aeh20s Well-Known Member May 30, 2023 #2 This interface: https://www.shure.com/en-US/products/accessories/mvi?variant=MVI-DIG With this cable: https://www.shure.com/en-US/products/accessories/amv-ltg15?variant=AMV-LTG15 is how I would do it.
This interface: https://www.shure.com/en-US/products/accessories/mvi?variant=MVI-DIG With this cable: https://www.shure.com/en-US/products/accessories/amv-ltg15?variant=AMV-LTG15 is how I would do it.
F FMEng Well-Known Member Fight Leukemia May 30, 2023 #3 You can do a wireless connection with a JK Audio BlueDriver F3. There are several mics that plug straight in to an iOS device. Among them are the Zoom IQ6
You can do a wireless connection with a JK Audio BlueDriver F3. There are several mics that plug straight in to an iOS device. Among them are the Zoom IQ6
NickVon Well-Known Member May 31, 2023 #4 I had an older similar device that I used for a SPL measure mic on an iPad years ago.... It did the job. Also used it for some quick and Dirty VO recordings for preshow announcements and such. IK Multimedia - iRig Pre HD iRig Pre HD - Digital, high definition microphone interface with studio quality preamp for iPhone, iPad, Mac and PC www.ikmultimedia.com
I had an older similar device that I used for a SPL measure mic on an iPad years ago.... It did the job. Also used it for some quick and Dirty VO recordings for preshow announcements and such. IK Multimedia - iRig Pre HD iRig Pre HD - Digital, high definition microphone interface with studio quality preamp for iPhone, iPad, Mac and PC www.ikmultimedia.com