Help with PRGs Ohm light

[carcharhinus]

I'm basically looking for some one who has built a fixture profile for this light. I'm working on the ion board and of coarse the fixture isn't included in their fixture library. If someone has experience with this light and can tell me what each of the 10 channels do when you address it in advanced dmx mode.

 

[sashapixie]

I'm fairly certain it is listed in the manual I found here: http://www.prg.com/ohm-light-manuals/

 

[carcharhinus]

Yeah I had a look at that manual earlier. I even called PRG and they couldn't give me an answer on the gekko controller or what the other channels contribute to.

 

[sashapixie]

It is really odd looking...almost like ranges of color temperature? But at the same time not. Have you tried using address check to see what changes when?

 

[jglodeklights]

What software version is your ION running? I'm looking at profile for both the Simple and Advanced modes on V2.2.

 

[carcharhinus]

I updated my version to the latest and I also found the ohm light. Here's the funny part, their profile doesn't work. I finally had the guys over at prg test it and what they came up with was the 10th channel has to be at 255 and that allows the 2nd channel to control the color temperature.