Cross post from creativecow...
We are having some problems getting VGA signals to look good passing through our SPII.
DVI and SDI inputs work perfectly.
We are using a grid to tell if the 1:1 sampling is working (individual pixels in a 1920x1080 grid so you can immediately see if you are not getting perfect 1080).
VGA signals looks perfect with connected directly to the preview or program monitor.
When using the DVI inputs or using the direct connection the grid displays perfectly, each pixel in the grid only taking up one pixel on the screen.
Once we use the VGA input to the SPII the sampling is no longer 1:1 and each pixel in the test grid takes up more than 1 pixel. We were able to play with the size settings long enough to get one of our computers to display properly with VGA, but many other PCs we have will not display perfectly using 1:1 sampling. The image is shifted to the right and we can never get the image to fill the screen.
As listed above we have verified that the PCs are outputting proper 1920x1080 signal by connecting them directly to a LCD monitor and observing full sharpness.
Any ideas here? The SPII on auto acquire thinks the signal is 1280x1080, and we manually change that to 1920x1080p @60 and change sampling to 1:1 but the sizing never allows us to fill the screen.
Thanks!
We are having some problems getting VGA signals to look good passing through our SPII.
DVI and SDI inputs work perfectly.
We are using a grid to tell if the 1:1 sampling is working (individual pixels in a 1920x1080 grid so you can immediately see if you are not getting perfect 1080).
VGA signals looks perfect with connected directly to the preview or program monitor.
When using the DVI inputs or using the direct connection the grid displays perfectly, each pixel in the grid only taking up one pixel on the screen.
Once we use the VGA input to the SPII the sampling is no longer 1:1 and each pixel in the test grid takes up more than 1 pixel. We were able to play with the size settings long enough to get one of our computers to display properly with VGA, but many other PCs we have will not display perfectly using 1:1 sampling. The image is shifted to the right and we can never get the image to fill the screen.
As listed above we have verified that the PCs are outputting proper 1920x1080 signal by connecting them directly to a LCD monitor and observing full sharpness.
Any ideas here? The SPII on auto acquire thinks the signal is 1280x1080, and we manually change that to 1920x1080p @60 and change sampling to 1:1 but the sizing never allows us to fill the screen.
Thanks!