For all you LS9 users a couple of questions:
Are you using Studio Manager or Stage Mix, I know only one can be used at a time but wondered what the preference was
Is anyone using Studio Manager using a wireless router and a tablet as an alternative to Stage mix, Or ??
On a LS9-16 where the access to the 31 GEQ is a bit weird on the faders which Studio manger or Stage Mix works best
Anyone using Airfader?
For IEM mixes is anyone using a combination of the omni outs and the Digital outs to give a large number of individual mixes (for instance keep 7-8 for feed to FOH, and then use 1-6 and 17-32 individual mixes
In two possible setups, one where the 16 ins are simple assigned 1-17 etc, vs using say 2 Behringer ADA8000s, what do most people do again on Monitor mix Do you find it easier to just split in the assignment, or physically split the inputs?
I'm starting a project using a LS9-16 and trying to come up to speed on the "conventional wisdom"
Are people putting the LS9 on stage, run monitors there, and use remote control for FOH or the opposite?
I have read this thread, so would be interested in any expanded comments
http://www.controlbooth.com/forums/sound-music-intercom/23977-ls9-remote-control-capabilities.html
Thanks for any input
Sharyn
Are you using Studio Manager or Stage Mix, I know only one can be used at a time but wondered what the preference was
Is anyone using Studio Manager using a wireless router and a tablet as an alternative to Stage mix, Or ??
On a LS9-16 where the access to the 31 GEQ is a bit weird on the faders which Studio manger or Stage Mix works best
Anyone using Airfader?
For IEM mixes is anyone using a combination of the omni outs and the Digital outs to give a large number of individual mixes (for instance keep 7-8 for feed to FOH, and then use 1-6 and 17-32 individual mixes
In two possible setups, one where the 16 ins are simple assigned 1-17 etc, vs using say 2 Behringer ADA8000s, what do most people do again on Monitor mix Do you find it easier to just split in the assignment, or physically split the inputs?
I'm starting a project using a LS9-16 and trying to come up to speed on the "conventional wisdom"
Are people putting the LS9 on stage, run monitors there, and use remote control for FOH or the opposite?
I have read this thread, so would be interested in any expanded comments
http://www.controlbooth.com/forums/sound-music-intercom/23977-ls9-remote-control-capabilities.html
Thanks for any input
Sharyn
Last edited: