I have made a lot of prtable dimmers from Teatronics modules. Add a
power cable, some output connectors and a control board from Northlight
DMX products. By the way, the control modules for the Teatronics MD288 can do both
DMX512 and AMX192. For
AMX, you set the first thumbwheel for 6 and then the next two for the tens and units. The 6 on the first thumb wheel indicates 0 in
AMX hundreds settings and 7 represents 1 in the hundreds. I forget exactly how it deals with the numbers above 192, but I think that it requires running a seperate
line to the third module and starting at 601 again. Somebody gave me the old
dimmer rack, because they were told that it was not
DMX compatible. Once I discovered that it was, they had already been sold three 96
dimmer sensor racks. so they told me to keep it. I've made a lot of good stuff out of the parts.