SHCP
Well-Known Member
Hey all,
I have a Chauvet hurricane haze 2d, and when running in DMX, it sputters in both the fan output an haze output
I set the starting address to 250, and patched 250 to one channel, and 251 to another. It is my understanding that this would give me fan on one and haze on the other. They work, but sputter like crazy, never giving full output.
The only other dmx instruments I use are my cyc lights, and their address is up in the 400's.
I have no instruments using 250 and 251.
In manual and remote mode they work just dandy.
The DMX is 5 pin, and at the end I use a little cable converter to make it 3 pin. I am concerned that the converter may be not sending the signal properly.
Anything else I can troubleshoot?
Thanks,
Tim
I have a Chauvet hurricane haze 2d, and when running in DMX, it sputters in both the fan output an haze output
I set the starting address to 250, and patched 250 to one channel, and 251 to another. It is my understanding that this would give me fan on one and haze on the other. They work, but sputter like crazy, never giving full output.
The only other dmx instruments I use are my cyc lights, and their address is up in the 400's.
I have no instruments using 250 and 251.
In manual and remote mode they work just dandy.
The DMX is 5 pin, and at the end I use a little cable converter to make it 3 pin. I am concerned that the converter may be not sending the signal properly.
Anything else I can troubleshoot?
Thanks,
Tim