ETC Ion Merging Cues

[GoboMan]

Hello again! Okay, yet another question...

On the Ion, is there a way to merge two cues together in a cue list? Let's say I have cue 20 which has channels 1 thru 5 up only. Now I want to make cue 21 which will add everything that cue 19 had, without affecting the levels of channels 1 thru 5 from cue 20. What's the best way to go about doing this?

 

[sashapixie]

Hi! In Cue 21 you can select the channels that are NOT 1-5 and say [Recall From][Cue][19][Enter][Update][Enter].

 

[danTt]

in Cue 20: 1 Thru 5 rem dim. Group Cue 19 Recall From Cue 19. Record Cue 21. If 1-5 are the only channels in Q 20 you can skip the rem dim part.

 

[lwinters630]

Go to cue 19, then record as cue 21. Ch 1 thru 5 recall From cue 20 enter.

 

[danTt]

Go to cue 19, then record as cue 21. Ch 1 thru 5 recall From cue 20 enter.

If you go that route (and don't have point cues in between) you could make it even simpler and do 1 thru 5 @ enter to remove the move instructions and let the values track from Cue 20.

 

[GoboMan]

Thanks, everyone! All the advice above has helped greatly and made my programming time much easier. ControlBooth for the win, once again! :-D