-
-
For a solution not requiring a black scrim, why not tape 0.3ND (yes, gel) <gasp!> ) to each unit, cutting total light by 1/2, while... -
Jay T replied to the thread FS - ETC SmartPack dimmer.Pictures of the back? What connections does it have?
-
Jay T replied to the thread Another attack in a theatre - Keeps happening again. Can we do anything?.Well I am glad the auto filter is there or I wouldn't be able to lurk during the day. Sometimes working for a school system stinks,
-
The big issues you will run into with an old ENR rack are bad AirFlow sensors on the processor (not a cheap component to replace) and...
-
Jay T replied to the thread Wrong size pipe problems.Not advisable to home make anything. The most likely reason pipes are wrong size is because plumbing is sized off of Inside Diameter...
-
Jay T replied to the thread Martin Lighting MAC 2000 Profile II.Be careful with capacitors that could be holding a charge.
-
Jay T replied to the thread "Theatre Systems Incorporated".I don't have any info on the console but in early 2000 installed a bunch of DMX to analog converters so that non-working control...
-
I was at a job site a few days ago and a "youthful" person asked me for a "tool".I asked which tool he needed specifically.A puzzled...
-
None, because they carry the full tools of their trade or craft as they use them constantly. The purpose of a multi tool is being able...
-
Speakers look like Innovox but could be something else. Probably weren't torqued down adequately the first time and vibrated loose...
-
Jay T replied to the thread High End Technospot Lamping Off.Update?
-
I have 2 Martin Jem ZR12 foggers, one is working perfectly fine with DMX and the other is not. The second one is constantly on when...
-
Jay T reacted to almorton's post in the thread Open 4/12, dmx decoder/LED tape works from board not stage. with
Like.
Always fit a terminator to the last fixture in a chain. You'll find a load of experts in the likes of Facebook who will tell you... -
Jay T replied to the thread Verify my math on this....Yellow and black male / female connector are true1. Female on cable plugs into male input of fixture, and vice versa for output. Good...
-
Jay T replied to the thread Verify my math on this....There are 2 types of powercon, at fixture the blue is input and white is output. Just match them up. Making terminations with those...
-
-
Loading…
-
Loading…