BlackoutGo
Member
I have an IQ mirror that is not behaving as it should (the rest of them on the rig are). Every so often it gives a slight tick movement.
I’ve tried running it by itself, completed the 4 pin loop, the dmx line is terminated, turned it off and on again. Dmx speed is slowed down as far as it can go on my net3 gateway (and on port 3, so it can be slower).
Suggestions? Device is from 2011, so it does have some years on it.
Thanks,
Jamie
I’ve tried running it by itself, completed the 4 pin loop, the dmx line is terminated, turned it off and on again. Dmx speed is slowed down as far as it can go on my net3 gateway (and on port 3, so it can be slower).
Suggestions? Device is from 2011, so it does have some years on it.
Thanks,
Jamie