6-Pin Connector for Clearcom RS-702 Dual Channel Pack

[bjgowers]

Hello,
I need adapters that go from 6pin male to 2x3pin female for my RS-702 dual channel packs. The adapters I am referring to are found here. I don't want to spend $78 per adapter, so I have elected to make my own. From past experiences with 6pin connectors, i know that there two different pin configurations. I normally refer to them as "offset 6 pin" and "straight 6pin." The connectors on my Clearcom pac are "straight 6 pin," but apparently vendors have different names for those connectors. I think what I'm looking for are the "switchcraft layout" connectors found here but I want to make sure. I'd hate to order a bunch of "offset" connectors and have to send them all back. Any insight would be helpful.

Thanks!

 

[AlexDonkle]

I've never heard of them as "straight 6", but generally there's switchcraft and non-switchcraft style. Neutrik even refers to them as "switchcraft compliant" on their own website. To your question though, yes Clear-Com uses the Switchcraft-style connector.

 

[epimetheus]

I've made the exact adapters you're referring to. Order by part number and you'll be fine.

http://www.neutrik.us/en-us/xlr/xx-series/nc6msxx

http://www.neutrik.us/en-us/xlr/xx-series/nc6fsxx