Automated Fixtures Adding Microh LED BAR PRO on to Strand 300 console using 2.8.6 software

[cplommer]

I have a manual, but can't seem to figure out the patch and allocation of features.

The DMX channel allocation for this light is:
Channel 1: 0-3 light OFF; 4-9 light ON; 10-39 strobe; 40-69 fade in and fade out; 70-99 auto 7 color change; 100-110 chase1; 111-121 chase2; 122-132 chase 3; 133-143 chase4; 144-154 chase5; 155-165 chase6; 166-176 chase7; 177-187 cgase8; 188-198 chase9; 199-209 chase10; 210-220 chase 11; 221-231 chase 12; 232-244 sound chase; 251-255 sound strobe
Channel 2: R G B Dimmer
Channel 3: R Dimmer
Channel 4: G Dimmer
Channel 5: B Dimmer
Channel 6: R Dimmer
Channel 7: G Dimmer
Channel 8: B Dimmer
Channel 9: R Dimmer
Channel 10: G Dimmer
Channel 11: B Dimmer

so far I only have

[1][LEDbar PRO Microh]
1, 0, 0, 255, 0, 0
11, 0, 0, 255, 0, 0
12, 0, 0, 255, 0, 0
13, 0, 0, 255, 0, 0
14, 0, 0, 255, 0, 0
15, 0, 0, 255, 0, 0
16, 0, 0, 255, 0, 0
41, 0, 0, 255, 0, 0

can't see any other way to put int the other attributes of the light based on their allocations.
any help is greatly appreciated...
Chris

 

[bharrell]

You'll want to treat each "cell" as a different fixture. So from the example above, it would seem to have 3 controllable cells. I see a master fixture that has control, dimmer, R, G, B. Then a color cell fixture that just has R, G, B for 2 additional cells.

Something like this...


[1][LEDbar PRO Microh Master]
20, 0, 0, 255, 0, 0
1, 0, 0, 255, 0, 0
14, 0, 0, 255, 0, 0
15, 0, 0, 255, 0, 0
16, 0, 0, 255, 0, 0

then...


[2][LEDbar PRO Microh Cell]

14, 0, 0, 255, 0, 0
15, 0, 0, 255, 0, 0
16, 0, 0, 255, 0, 0

Please email me if you need further assistance. [email protected]

Bobby