Well,
Enttec sent me a firmware change to accomadate the
LED flicker problem.
The good news is, the firmware change I uploaded for the
Enttec DMX USB PRO works as a "band-aid" for the flicker problem with these "cheaper"
LED units. He gave me a "special" firmware update to slow down the
DMX by increasing the interslot time. By default the USB PRO sends
DMX at the maximum speed.
I have not really noticed a performance hit.
Enntec mentioned "they get a number of similar problems on a regular basis and up to now it has always been non compliant
DMX512 lights ...
Each non compliant light reacts in it's own strange way."
I'm real happy to see these lights dim without driving me freaking nuts flickering!
Too bad it's a band-aid approach, but I can live with that.
I'd like to get my hands on some of the expensive
LED pars and panels to see if they have this issue.
I heard they do not.