Dcrawf1
Member
Hello, have long been a browser of control booth but this is my first time posting. Hoping to get a little help..
Our church currently has a stage setup of 8 stage pieces with screen door mesh on them being illuminated by Elation Wash PRO fixtures. We were using 6 stage pieces but made 2 more of them, so we bought two more wash PRO fixtures.
One of the new fixtures starting malfunctioning. It will "flicker", or come off and then on again. At the same time it's doing that, it moves to the right and down momentarily, then returns to it's programmed position. It's like some kind of glitch.. almost as if it is receiving some rogue command.
We are controlling them via WDMX. We've got an ETC Ion console that we hooked up an Elation WDMX module to, which connects to the fixtures onstage.
Any help would be great!
Our church currently has a stage setup of 8 stage pieces with screen door mesh on them being illuminated by Elation Wash PRO fixtures. We were using 6 stage pieces but made 2 more of them, so we bought two more wash PRO fixtures.
One of the new fixtures starting malfunctioning. It will "flicker", or come off and then on again. At the same time it's doing that, it moves to the right and down momentarily, then returns to it's programmed position. It's like some kind of glitch.. almost as if it is receiving some rogue command.
We are controlling them via WDMX. We've got an ETC Ion console that we hooked up an Elation WDMX module to, which connects to the fixtures onstage.
Any help would be great!