ETC Express Console auxiliary light

[andyw3]

I have an ETC Express lighting console, and we have a little auxiliary 12V light that connects to the top. Yesterday, the bulb in the light burst. Do you guys know how to either a) replace that bulb or b) order another one?

Thanks!

 

[derekleffew]

http://www.controlbooth.com/forums/lighting-electrics/26637-littlelite-bulb-replacement.html

Some of many vendors:
64111 - OSR 64111 - OSRAM 5W, 12V LITTLELITE REPLACEMENT LAMP Detail Page
Osram 64111 12V 5W Littlite Light Bulb, Replacement Lamp
Littlite Bulbs and Accessories

 

[SteveB]

When you order replacement lamps, also order the "O" rings. These are the little rubber rings that fit on the lamp housing to keep the shroud on tight. The rubber rings tend to get broken if care is not taken removing and re-installing the shroud, which you need to do to replace the lamp.

 

[andyw3]

Wellll that won't be a problem as the shroud was ripped off by a kid who was far less careful around nice things than he should be. I'll look out for the ring, though, thanks.

 

[andyw3]

http://www.controlbooth.com/forums/lighting-electrics/26637-littlelite-bulb-replacement.html

Some of many vendors:
64111 - OSR 64111 - OSRAM 5W, 12V LITTLELITE REPLACEMENT LAMP Detail Page
Osram 64111 12V 5W Littlite Light Bulb, Replacement Lamp
Littlite Bulbs and Accessories

I wasn't quite sure what it was called - thanks! And I'll look into those vendors too.