We have had a new ETC Mosaic system installed, we're using 6 BPS, a 5" Touchscreen and the MSC controller for our house lighting system. We have a Chauvet Net X II and we use dot2. on PC for our lighting console (we're a high school). The Net X II is acting as a node for dot2. on PC and for the Mosaic (more on that in a second).
So I pushed my config out (events in the timeline & triggers work in the simulator), and the touchscreen gets its interface I programmed (so the controller is working), and the beacons show on the BPS. Nothing happens when you press a button.
I have my lights patched, the right universe everything. I can't find anything on ETCs site, but it's implied that the MSC supports sACN? So when I trigger an event, that should be sent over Ethernet to the Net x II via sACN? Or do I have to use the DMX output pins on the MSC? The net x II is set to sACN.
Also no matter what I do, I cannot for the life of me, get the button push stations to do as they've been programmed. I set the top two buttons to be lit, and the bottom two to pulse. I push my program, and they're either all lit, or none lit. Am I missing something?
So I pushed my config out (events in the timeline & triggers work in the simulator), and the touchscreen gets its interface I programmed (so the controller is working), and the beacons show on the BPS. Nothing happens when you press a button.
I have my lights patched, the right universe everything. I can't find anything on ETCs site, but it's implied that the MSC supports sACN? So when I trigger an event, that should be sent over Ethernet to the Net x II via sACN? Or do I have to use the DMX output pins on the MSC? The net x II is set to sACN.
Also no matter what I do, I cannot for the life of me, get the button push stations to do as they've been programmed. I set the top two buttons to be lit, and the bottom two to pulse. I push my program, and they're either all lit, or none lit. Am I missing something?